高温老化室是电气安装和使用方法的特殊要求，请严格按照说明书或连接的安装说明，注意多机电力容量不同时使用一个电源，以避免压力下降，影响机器的性能，请使用专用电路。无锡合达电子设备有限公司是一家集设计开发、生产制作、销售、服务于一体的老化房设备制造厂商,电子产品老化房又叫高温老化房,烧机房或温升房,主要分为:房间隔离式老化房,Chamber隔离式老化房,移动式高温老化房！
High temperature aging chamber is a special requirement of electrical installation and use method. Please strictly follow the instructions or connection installation instructions, pay attention to the use of a power supply at different times of multi-machine power capacity, in order to avoid pressure drop and affect the performance of the machine, please use special circuit. Wuxi Heda Electronic Equipment Co., Ltd. is an aging room equipment manufacturer which integrates design, development, production, sales and service. The aging room of electronic products is also called high temperature aging room. It burns machine room or heating room. It is mainly divided into: room isolation aging room, Chamber isolation aging room and mobile high temperature aging room.
公司位于无锡太湖之滨--钱桥,主要生产电子产品老化房,无铅波峰焊,回流焊,喷雾波峰焊锡机,超高波峰焊,半自动波峰焊锡机,台式和立式焊锡机,喷流焊锡机,热风回流焊机,自动皮带生产流水线,总装生产线,调试工作台,节能灯老化线,老化房,超声波清洗机,磨刀机,钨钢刀片,烘干老化设备,高低温环境试验设备等多种电子产品。
The company is located at Qian Qiao, Taihu, Wuxi. It mainly produces electronic products aging houses, lead-free wave soldering, reflow soldering, spray soldering tin machine, ultra high wave soldering, semi-automatic wave soldering tin machine, desktop and vertical soldering machine, spray welding machine, hot air reflow soldering machine, automatic belt production line, assembly production line, commissioning workbench, energy-saving lamp aging line, aging room, ultrasonic cleaning machine, sharpening machine, tungsten steel knife. Various electronic products, such as tablets, drying and aging equipment, high and low temperature environmental testing equipment, etc.
1：电压型淋雨试验箱的要求3 5w380v50hz直径，请分配法进线电源接线按照防水测试用例来满足这个要求后。
1: Voltage rain test box requires 35w380v50hz diameter. Please distribute the power supply wiring according to the waterproof test case to meet this requirement.

2：仔细检查高温老化房布线或管道是否完好，如果有损坏，请及时更换或修理。
2: Check carefully whether the wiring or pipeline of the high temperature aging room is in good condition. If there is any damage, please replace or repair it in time.

3：除了机器连接权外，请不要接其他相关电源，防止因负荷的电力供应更多的设备的增加引起的负荷太高，燃烧机。
3: In addition to the right to connect the machine, please do not connect other relevant power supply, to prevent the increase of the load caused by the power supply of more equipment, the burner.

4：电源电压变化试验箱+ 10%的允许范围。
4: Power supply voltage change test box + 10% allowable range.

5：焊丝熔化朗高温老化室尺寸：4mm2，电缆长度一般为3米。
5: Welding wire melting Lang high temperature aging chamber size: 4 mm2, cable length is generally 3 meters.